iFone


用Blackra1n唔得停左係RUNNING
十月 14, 2009, 3:46 下午
Filed under: iPhone 技術交流

解決 blackra1n Hand 係 Running 方法

http://mobile.uwants.com/viewthread.php?tid=8871853&extra=page%3D3&page=2

好多人用都blackra1n停係Running,包括我在內,
攪左成晚,係網上找到N種方法,最後我用呢個方法解決到。
我部係3G行貨8G,iTunes auto update 3.1.2,大家可以試試。

剛剛再JB第二部時發覺都唔係次次得,做左四五先出到blackra1n張相。

1. 關閉所有防毒軟件同防火牆 (包括自行安裝及Windows內置)

2. 打開iTunes保持連線iPhone,執行blackra1n當停在running時,保持blackra1n在running唔好理佢。

3. 按Home+Power強制關機,第一個blackra1n會變Wait for reboot及出現訊息,又唔洗理佢。

4. 重開iPhone在白蘋果出現時, 再按blackra1n.exe開多另一個blackra1n,立即按埋 make it ra1n,

5. 開機後就會自動人返去Recovery Mode,跟住好快就會見到 BlackRa1n 張相,咁就成功。

other old  post

http://mobile.uwants.com/viewthread.php?tid=8871494&extra=page%3D2

Blackra1n

C:\Program Files\iTunes入面再試下

3G 3GS 都得

前提一定要你部機係3.1或者3.1.2

見到黑雨 DOWN CYDIA 就OK

另外入左CYDIA/MANAGE/EDIT/ADD 打網址 http://repo.sinfuliphone.com

————————————————————————————————–

APP  " optional"

專DOWN 破解版 Cycntact 可以令你見到通信錄有相係度

Recent/CallLog Delete 專DEL單一電話紀錄

另外http://cydia.hackulo.us

Down AppSync for OS3.1 要DOWN呢個先可以放IPA ( for ituen install app)

另外http://www.iphone.org.hk/apt

DOWN HK Carrier Firmware3.0

改變電訊商圖案

另外http://cydia.xsellize.com

down iacces 3.0破解版

reload完 springbood唔計架

要down完重新開機就ok

希望幫到你地.呢幾個最常用

另外呢個方法
由會員gambler88

放係C:\Program Files\Common Files\Apple\Mobile Device Support\bin

廣告


iPhone 與 iPod touch 上的更新及回復提示訊息
十月 14, 2009, 3:41 下午
Filed under: iPhone 技術交流

徵兆

http://support.apple.com/kb/TS1275?viewlocale=zh_TW&locale=zh_TW

嘗試使用 iTunes 更新或回復 iPhone 或 iPod touch 時,您可能會在 iTunes 中看到提示訊息,導致更新或回復程序停止。您還可能會在 iPhone 或 iPod touch 上看到“連接 iTunes”畫面。

iTunes 中的提示訊息也可能包含下列其中一個號碼 (但不限於這些號碼):2、4、5、6、9、13、14、-18、19、20、21、23、-48、-50、1002、1011、1013、1015、 1601、1602、1603、1604、1608、1609、1611、1612、1639、2003、2005、2006、3004、3013、 3014、3015、9807、-9808。



FixThis: BlackRa1n stuck at the “Running…” Screen? [UPDATE]
十月 14, 2009, 1:47 上午
Filed under: iPhone 技術交流

Post on  24 Dec 09

3.1.2 3Gs  week 50 on Blackra1n RC3

http://techpp.com/2009/11/03/jailbreak-iphone-312-firmware-with-blackra1n-rc3/

Posted: 12 Oct 2009 10:03 PM PDT


Been getting quite a few mails from iPhone users who are trying to 3.1.2 firmware using . Users are getting stuck on “running…” stage and iPhone would stay in the Recovery Mode. If you are facing this issue, dont worry try this:

  1. Unplug your iPhone from your computer.
  2. Restart your iPhone by holding Power and Home buttons for over 10-12 seconds
  3. Make sure that the .exe is running from your C:/ (Copy and Paste it onto C: root)
  4. Check Task Manager for any iTunes processes running close them all (Ctr+Alt+Delete and run taskmgr.exe)
  5. Right Click .exe and under Properties change to “Run in Compatibility Mode” and choose Windows XP. Then Run .exe as Administrator.

Make sure that when you are running , non of iTunes processes are active. iTunes shouldnt launch, if that happens wont work.

Cheers!!!


UPDATE: Found this important troubleshooting tip at CydiaUpdate.

Step 0. Ensure that within iTunes you have unchecked “Sync Automatically” and under Edit -> Preferences, Devices, choose Prevent iTunes from syncing with Devices Automatically.

1. Ensure that your iPhone is on. You can see your Springboard. Plug your iPhone into your computer and ensure that iTunes recognizes it and preform a sync/backup/update.

2. Once you have completed this, close iTunes completely. Press the start button and choose Run. Press Ctrl+Alt+Del and check your task manager to ensure that any iTunes processes are closed, such as iPodService.exe, iTunesHelper.exe, etc. These must be turned off.

3. Ensure that your copy of .exe is located in C:\.exe.

4. Right click .exe. If running Windows 7 choose properties, and then compatibility. Choose to run in Windows XP SP3 Mode.

5. Right Click .exe and choose Run As. Chose the Administrator account and enter in the password.

6. Once .exe is running, click Make it Ra1n.

7. You should see your iPhone automatically reboot and show a usb cable and iTunes, your typical restore/dfu screen.

8. You should see .exe change to Running.. and GeoHotz face will appear on your iPhone. It will automatically reboot when done and that is when you should see the “Jailbreaking complete” dialog that likes to appear when you manually restart after no response.

I hope this helps a bit more. If I missed something I will try and squeeze it in right away.

Here is a video put together from David @ iPhoneDesignz. Glad my steps could help :p

[via – CydiaUpdate]

UPDATE 2: If none of the above steps work, Try this (Someone name J0sh did it this way)

Success finally!

This is what I did for iphone 3g, win7. Put in c://

kill ituneshelper.exe

leave everything else as is. Turn off your phone. run as admin, nothing else. Click make it rain. Then hold down both the power and home keys. When you see the apple logo release the power key, keep holding home till you see geo’s face. Let it do its thing.

I’m not sure if this actually fixed anything, or if anyone else’s voodoo is doing something or if occasionally it just works and then people post what they did and everyone thinks its a clue.

Just another method for you to try, its what worked for me after trying 20+ different things and multiple attempts at each.

Good luck, I think that and persistence are the key things needed to make this work.

Tags: ,

Related posts



受保護的文章:HTC Hero Sense UI on iPhone
十月 13, 2009, 2:36 下午
Filed under: Uncategorized

該內容受密碼保護。如欲檢視請在下方輸入你的密碼:

輸入你的密碼方能觀看迴響。


DoubleTwist 投資者,包括香港首富李嘉誠
十月 11, 2009, 4:46 上午
Filed under: iPhone News and Accessories

助 iPod用戶鬆綁下載音樂黑客新軟件破 iTunes壟斷~doubleTwist擁有多名投資者,包括香港首富李嘉誠和迪士尼前主席奧維茨。

http://www.doubletwist.com/dt/Download/DownloadWindows.dt

Watch the demo

Watch the demo